Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Flower Mound
Dryer vent cleaning in Flower Mound typically costs $149-$289 for a standard single-duct residential job, with most appointments completed in 60-90 minutes and a written price delivered before any work begins. If your home sits in Bridlewood, Canyon Falls, or Stone Hill Farm, your vent system was likely installed during the same 1993-2008 building wave that defined this town, and it’s probably sharing a roofline with a prefab chimney chase that’s aging on the exact same timeline.
We dispatch to Flower Mound from our Dallas-Fort Worth office, and our crews know the local housing stock: the long duct runs in Wellington’s larger floor plans, the roof vent hoods packed tight against factory chimney chases along FM 2499, and the lint buildup that sits undisturbed through North Texas’s nine-month warm season. Call (940) 373-6912 for a free written estimate. Our Dryer Vent Cleaning team arrives with rotary brushes, HEPA vacuums, and the camera gear to document what we find.
Why Emberly Chimney Cleaners Denton Is Flower Mound’s Preferred Dryer Vent Cleaning Company
Flower Mound homeowners don’t need a sales pitch. They need to see the lint, know the price, and get a record they can show their insurer. We’ve built our reputation here on exactly that.
Our reviews from Flower Mound customers consistently mention two things: the technician named in the text alert actually shows up in uniform, and the written scope matches the final invoice. No add-ons discovered mid-job. That’s Haven Standard Clause 1, “Have it in writing,” and we’ve applied it to every one of the 38,000+ inspections and cleanings we’ve completed since 2009.
Response time to Flower Mound runs same-week for standard bookings, with scheduling coordinated from our DFW office so we’re not guessing at your subdivision layout. We know which Stone Hill Farm plans have the laundry room on the second floor with a 25-foot vertical duct run, and which Bridlewood layouts tuck the dryer against an exterior wall with a short horizontal vent. That local knowledge means we arrive with the right equipment and don’t burn your appointment time on surprises.
Our background-checked technicians carry license information on every page of every document they hand you. You’ll get a text when they’re en route, a written price before they start, and a photo record of the cleaned vent, the cleared hood, and any adjacent chimney conditions we spotted while on your roof. Clause 4 of the Haven Standard requires that documentation; we’ve done it since 2009, years before it became standard practice.
Our Dryer Vent Cleaning Services in Flower Mound
Dryer Vent Duct Cleaning and Lint Removal
The typical Flower Mound home built in 1998 or 2005 has a 4-inch rigid or semi-rigid duct running 15-35 feet from the laundry room to a roof or gable-end vent hood. Over years of use, that duct accumulates lint that restricts airflow, forces your dryer to run longer, and creates a genuine fire hazard. We run a rotary brush system with simultaneous vacuum extraction from both the dryer connection and the vent hood, removing the packed lint that household tools can’t reach. In Wellington’s larger homes with second-floor laundry rooms, we’ve pulled out compacted lint loads that reduced airflow by more than 60 percent. After cleaning, we measure static pressure and airflow at the hood to confirm the system performs to manufacturer spec.
Roof Vent Hood and Cap Inspection
Here’s where Flower Mound’s unique housing stock matters. In Bridlewood and along Flower Mound Road, your dryer vent hood likely sits within arm’s reach of a prefab chimney chase topped with a painted steel chase cover from the same construction era. When that chase cover rusts through, water pools on the chase top and drips directly beside your dryer vent hood, accelerating corrosion and sometimes seizing the flapper mechanism. We inspect both components while we’re on the roof. If the hood is damaged or the screen is clogged with lint and debris, we document it with photos and give you a written price for replacement using Famco or Copperfield components sourced through our Haven buying network. We’ve replaced dozens of these hoods in Stone Hill Farm alone after homeowners called us for what they thought was a chimney leak.
Annual Chimney and Vent Inspection
A Flower Mound home with multiple flues and a long dryer run needs coordinated inspection, not isolated appliance checks. Our NFPA 211 Level 2 inspection includes camera documentation of the chimney flue, smoke chamber, and firebox, plus assessment of the dryer duct’s condition, material type, and routing. We find that homes in Canyon Falls with three or more fireplaces often have the laundry room centrally located, meaning the dryer duct shares wall cavities with gas lines or HVAC returns. Our inspection identifies improper materials (plastic flex duct, for instance, which violates IRC M1502.4.2) and clearance issues that a standalone dryer service would miss. The documented photo record becomes your baseline for comparison year over year.
Chimney Swift and Debris Screening
North Texas’s long warm season draws federally protected chimney swifts to uncapped flues, particularly along the FM 2499 corridor where mature trees meet newer construction. If swifts have nested in your chimney, we cannot legally disturb them until they migrate in fall. But the same nesting debris, leaves, and pollen that clogs chimney caps also packs into dryer vent screens and hoods. We clear what we can access, document any bird-guard restrictions, and schedule follow-up work when the season allows. In one Stone Hill Farm call, we found a bird-guard screen so clogged with lint and nesting material that the homeowner had been running their dryer on two cycles to dry a single load, assuming the appliance was failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Flower Mound
We stock replacement components from Gelco, Olympia Chimney, Famco, and Copperfield through our Haven buying network, which means most vent hood replacements and cap repairs in Flower Mound don’t require a second appointment for parts. The painted steel chase covers on 1990s Heatilator and Majestic prefab units aren’t made anymore, but we carry galvanized and stainless alternatives that outlast the originals. For dryer vent hoods, Famco’s galvanized wall and roof caps with removable screens match most Flower Mound installations without custom fabrication. If your chase cover has rusted through next to the vent hood, we can quote both replacements in the same visit, sourced and installed with a single written warranty.
Common Dryer Vent Cleaning Problems We See in Flower Mound Homes
- Rusted chase covers masking vent blockages. In Bridlewood and Wellington, the painted steel chase covers installed during the 1997-2005 building wave are now failing simultaneously. Homeowners call us for water stains or a burning smell, assume it’s the fireplace, and don’t realize the dryer vent hood six inches away is corroded shut with a decade of lint.
- Long vertical duct runs in two-story plans. Stone Hill Farm and Canyon Falls homes with second-floor laundry rooms often have 25- to 35-foot duct runs that sag in wall cavities, trapping lint in low points where a standard brush pass won’t reach. We use flexible rotary cables and reverse-blowing techniques to clear these sections.
- Chimney swift nesting debris in shared roof zones. The uncapped flues along FM 2499 attract protected swifts by May, and their nesting material blows into adjacent dryer vent screens. We clear what we can legally access and flag any work that must wait until fall migration.
- First-degree creosote and lint buildup from light fireplace use. Flower Mound homeowners who burn 15-30 times per season rarely notice gradual accumulation in either system. Then a February freeze or a new dryer stresses a vent and flue that haven’t been inspected in years, and both problems surface at once.
Pricing for Dryer Vent Cleaning in Flower Mound, TX
| Service | Typical Range in Flower Mound |
|---|---|
| Standard single-duct dryer vent cleaning (ground or single-story access) | $149-$189 |
| Two-story or long-run duct cleaning (25+ feet, roof access required) | $189-$249 |
| Vent hood or cap replacement (parts + labor, standard models) | $89-$159 |
| Combined dryer vent cleaning + NFPA 211 Level 2 chimney inspection | $289-$389 |
| Second opinion on competitor’s written estimate | Free |
What moves you within these ranges: duct length and material, roof height and pitch, whether the vent hood needs replacement, and whether we find code violations (like plastic flex duct) that require correction. We deliver a written price before any work starts, with the scope and warranty in the same document. No exceptions. That’s Haven Standard Clause 1. Call (940) 373-6912 for your free estimate.
We Also Serve Cities Near Flower Mound
Our crews cover Flower Mound and the surrounding communities: Roanoke, Southlake, Grapevine, and Lewisville. The same housing stock patterns, chase cover failure timelines, and lint buildup conditions appear across these markets, and we apply the same written-price-first, photo-documented standard to every appointment.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Flower Mound
Yes, and in 1998-built Flower Mound homes, the roof vent hood often matters more because it’s the same age as the rusting chimney chase cover beside it. We inspect both while we’re on the roof, and we’ve replaced dozens of seized or corroded hoods in Bridlewood and Stone Hill Farm that were restricting airflow worse than the duct itself. Call (940) 373-6912 and we’ll check both components, give you a written price for any needed work, and show you photos of what we found.
Annually, coordinated with your chimney inspection. The NFPA recommends annual chimney inspection for all wood-burning systems, and dryer vent manufacturers recommend annual cleaning for ducts over 15 feet. In Canyon Falls and Wellington homes with three fireplaces and a second-floor laundry room, we book both services in one visit, document everything with photos under Haven Standard Clause 4, and give you a single written record for your insurer. Call (940) 373-6912 to schedule.
Only the flue, and only during nesting season (roughly May through August). Chimney swifts are federally protected under the Migratory Bird Treaty Act, so if they’re actively nesting in your chimney, we cannot disturb them until they migrate in fall. We can still clean your dryer vent unless the duct itself is blocked by nesting debris we can’t legally remove. We document the restriction, clear what we can, and schedule follow-up work when the season allows. Call (940) 373-6912 and we’ll assess what’s accessible now.
Probably not, but the same conditions that cause one often hide the other. A burning smell from the dryer area is usually lint overheating in a restricted duct, not creosote from the fireplace. However, in Flower Mound’s 1990s-2000s homes, the rusted chase cover beside your vent hood can drip water into the chase, creating a musty odor that homeowners mistake for either lint or creosote. We diagnose the actual source with a camera inspection and airflow test, then give you a written price to fix the right problem. Call (940) 373-6912 for a free assessment.
We stock Famco and Copperfield vent hoods and caps, plus Olympia Chimney and Gelco chase covers and flue components, sourced through our Haven buying network specifically to keep replacement prices honest. The original painted steel chase covers on your Heatilator or Majestic prefab unit are no longer manufactured, but our galvanized and stainless alternatives outlast them and match most Flower Mound rooflines without custom work. We carry standard sizes on our trucks and can quote replacement during your cleaning visit. Call (940) 373-6912 for availability.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Denton, serving Flower Mound and the Dallas-Fort Worth metro since 2009.