Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Fireplace Services for Denton Homeowners
Denton Fireplace Services typically cost $150-$850 depending on whether you need a routine gas valve adjustment, a cracked firebox repair, or a full wood-to-gas conversion. Most inspections and minor repairs are completed in a single visit, with written pricing agreed before any work begins. Call (940) 373-6912 to book a free estimate.
We’ve inspected and serviced more than 38,000 fireplaces and chimney systems since 2009, and we’ve learned that Denton homes built between 2015 and 2025 - especially in neighborhoods like Southridge, Robinson Oaks, and the newer builds around Rayzor Ranch - often have factory-built fireplaces that were never properly commissioned or were installed by builders who skipped the NFPA 211 Level 2 inspection. That gap shows up three to five years later as draft problems, cracked refractory panels, or gas valves that won’t hold pilot. We’re Emberly Chimney Cleaners, and we operate under the Haven Standard: written price before work starts, camera-scan documentation on every visit, and a 365-Day Done Right Promise backed by a documented photo record. Corrine Halstead leads our operations, and our technicians are background-checked, uniformed, and text-notified when en route.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
What Our Fireplace Services Include
Gas Fireplace Service
Gas fireplaces in Denton need annual service even when they light fine. The thermocouple degrades, the burner ports clog with dust from our north Texas wind, and the venting system can develop condensation cracks you won’t see from the living room. We pull the burner assembly, clean and inspect the pilot orifice, test gas pressure at the manifold, and run a combustion analysis. Every gas service includes a camera scan of the venting system under Haven Standard Clause 4, with photos of the termination cap, firebox condition, and any corrosion on the heat exchanger.
Wood Burning Fireplace
Wood burning systems in Denton collect creosote faster than many homeowners expect, especially if you’re burning unseasoned oak from local suppliers or pine from weekend trips to the Sam Rayburn area. We perform a full Level 2 inspection: camera down the flue to check for Class III glazed creosote, inspection of the smoke chamber and firebox for spalling brick or deteriorated mortar, and measurement of flue liner clearance to combustibles. If the firebox needs tuckpointing or the throat damper is seized, we document it with photos and deliver a written scope and price before proposing any repair.
Fireplace Insert
Inserts are essentially a wood stove fitted into your existing fireplace opening, and they’re common in Denton’s 1980s and 1990s ranch homes in areas like Nottingham Woods and Windsor Ridge. The critical issue is proper liner connection: the insert must vent through a stainless steel liner sized to the appliance, not into the original clay flue. We’ve removed dozens of improperly installed inserts where the previous owner or an unqualified installer left a dangerous gap. Our insert service includes liner pull and camera inspection, gasket replacement, and verification that the surround panel seals properly against the fireplace face.
Damper Repair
A throat damper that won’t open fully costs you heat up the chimney; one that won’t close lets conditioned air escape year-round. In Denton’s climate, that energy loss adds up fast. We inspect the damper plate for warping or corrosion, check the handle mechanism or chain assembly, and measure the frame for square. If the throat damper is beyond repair, we often recommend a top-sealing damper from our fireplace services in Denton inventory, which seals at the flue top and eliminates the metal-on-metal heat loss path of a traditional damper.
Firebox Repair
The firebox is where combustion happens, and its refractory panels or brick lining take direct flame impingement. Cracked panels in a factory-built unit must be replaced with OEM or listed aftermarket panels - never patched with furnace cement, which is a temporary fix we see too often in Denton rental properties. For masonry fireboxes, we perform tuckpointing with high-temperature refractory mortar, rebuild deteriorated hearths, and address smoke staining that indicates a drafting or construction defect. Every firebox repair quote includes a written warranty and the Clause 4 photo record showing before, during, and after conditions.
Fireplace Conversion
Converting a wood fireplace to gas, or updating an older gas system to direct vent, requires more than dropping in a new unit. We verify the existing flue capacity against the new appliance’s venting requirements, check clearances to mantels and combustible trim (often too tight in Denton’s smaller historic homes near the downtown square), and coordinate gas line sizing with a licensed plumber if needed. Our conversions use listed appliances from trusted manufacturers, with materials sourced through our Haven buying network from suppliers like Gelco and Olympia Chimney to keep pricing honest and documented.
Brands We Service for Fireplace Services
We’ve serviced hundreds of Heat & Glo, Majestic, and Napoleon units in Denton County, and we maintain relationships with distributors to source OEM parts without the markup of retail channels. For factory-built fireplaces, we stock common refractory panels, burner assemblies, and pilot kits for brands including Monessen, Superior, and Lennox. When you call, we’ll ask for the model number from the metal rating plate - usually inside the firebox or under the smoke shelf - so our technician arrives with the right parts rather than charging you for a return trip.
We also work extensively with venting and termination components from Gelco and Olympia Chimney, procured through Haven’s buying network specifically to keep customer prices honest. Gelco’s stainless steel caps and chase covers hold up well in Denton’s hail and wind exposure. Olympia Chimney’s liner systems are our go-to for insert installations and relining jobs where the original clay flue is compromised. Whether you have a name-brand unit or a builder-grade fireplace with the label worn off, we can identify it, source parts, and restore safe operation. And if you’re considering an upgrade, we offer a Free Second Opinion on any written estimate from another company.
BeforeAfterSigns You Need Fireplace Services Right Now
- Soot or smoke stains on the fireplace face or mantel. This means combustion byproducts are escaping into your living space instead of venting up the flue. In Denton’s tighter-built homes, that also means carbon monoxide risk. We find the source - blocked flue, improper firebox dimensions, or a failed smoke guard - and fix it with documentation.
- Gas fireplace won’t stay lit or pilot keeps going out. A failing thermocouple or thermopile is the usual cause, but so is a draft condition pulling the pilot flame off the sensor. We test both the component and the venting before replacing parts, so you don’t pay for a symptom fix that fails again in two weeks.
- Cracks in refractory panels or missing mortar in brick firebox. These cracks allow heat to reach combustible framing. In a factory-built unit, they’re a code violation; in masonry, they’re a fire hazard that worsens with every fire. We photograph the damage under Clause 4 and quote replacement or rebuild with no pressure.
- Drafty smell from the fireplace when it’s not in use. That odor is outside air, and often moisture, coming down an unsealed flue. In Denton’s humid spring and fall, it also means musty odors and accelerated rust on metal components. A top-sealing damper or proper chimney cap installation usually solves it.
- Loud roaring or whooshing sound when gas fireplace operates. This indicates over-firing - too much gas for the burner design - or a partially blocked vent. Both conditions can damage the firebox or create carbon monoxide. We shut the unit down, measure input pressure, and inspect the vent run before returning it to service.
Our Fireplace Services Process - Step by Step
- 1
Schedule and confirm. Call (940) 373-6912 and you’ll reach a live person, 24 hours a day. We ask about your fireplace type, symptoms, and the last service date. You’ll get a text confirmation with your technician’s name and a 2-hour arrival window.
- 2
Arrive and protect. Our technician arrives in a marked vehicle, uniformed, with license information visible. We lay protective covering from the door to the fireplace, inspect the work area for access, and review your concerns before touching anything.
- 3
Inspect with camera. Every visit includes an NFPA 211 Level 2 inspection: visual scan, camera down the flue or vent system, and documentation of the firebox, damper, smoke chamber, and exterior termination. Photos are time-stamped and stored to your record under Haven Standard Clause 4.
- 4
Explain findings and deliver written price. We show you what the camera found on a tablet, name the condition in plain terms - “Class II creosote buildup,” “spalling at the rear firebox wall,” “thermocouple reading 18 mV, below the 25 mV threshold” - and deliver a written scope with flat pricing before any work begins. This is Haven Standard Clause 1: Have it in writing.
- 5
Perform work, document completion, and warranty. After your approval, we complete the service, clean the work area, and provide a completion report with photos, readings, and warranty terms. The 365-Day Done Right Promise covers all workmanship. If it’s not done right, we make it right.
How Much Does Fireplace Services Cost in Denton?
Wondering how much Fireplace Services costs? A typical gas fireplace tune-up and safety inspection in Denton runs $150-$275. Wood burning fireplace cleaning and Level 2 inspection runs $225-$375, depending on creosote buildup and whether the damper needs adjustment. Firebox repairs range from $350 for refractory panel replacement in a factory-built unit to $1,200-$2,800 for masonry tuckpointing or partial rebuild. Damper repair or top-sealing damper installation runs $400-$850. Fireplace insert installation with proper liner and surround typically costs $2,800-$5,500. Full wood-to-gas conversions start around $3,500 and run to $7,500 for high-efficiency direct-vent units with extensive finish work.
Several factors move the price within these ranges. Accessibility matters: a firebox in a tight corner with custom stone surround takes longer to protect and disassemble. Parts availability for discontinued brands can add a sourcing fee, though we stock common components to avoid this. The condition of the existing venting or flue liner determines whether a simple cleaning suffices or relining is needed. And seasonal demand peaks in October through December, though we don’t surcharge for booking during busy periods.
To avoid overpaying, get any competitor’s estimate in writing and bring it to us for a Free Second Opinion. We price by the scope, not by what we think you’ll pay. Every quote includes all materials, labor, the Clause 4 photo record, and warranty documentation. Nothing is added after the fact. Estimates are free and carry no obligation.
Fireplace Services Near Denton - Our Service Area
We serve Denton directly and reach surrounding communities regularly: Fireplace Services in Krum to the west, Fireplace Services in Corinth to the south, plus Lantana, Lake Dallas, Highland Village, Sanger, Flower Mound, Little Elm, Lewisville, Roanoke, and Trophy Club. Most Denton homeowners see same-week scheduling, with Krum and Corinth typically within 3-5 business days. Our technicians live in the area and know the local housing stock - from the 1920s bungalows near UNT to the new construction in Lantana and the Cross Roads corridor.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well, including Fireplace Services in Krum. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Fireplace Services in Denton
Professional fireplace service includes a full safety inspection, cleaning of combustion components, operational testing, and documented photo evidence of conditions found. For gas units, we clean and inspect the burner, pilot, thermocouple, and venting system; for wood burning, we remove creosote buildup and inspect the firebox, damper, and flue liner with a camera. Every visit from Emberly Chimney Cleaners Denton includes the Haven Standard Clause 4 photo record and a written report.
A standard gas fireplace tune-up takes 60-90 minutes; a wood burning fireplace cleaning and Level 2 inspection takes 90 minutes to 2.5 hours depending on creosote accumulation and accessibility. Firebox repairs or insert installations typically require 3-5 hours and may need a return visit if custom parts are required. We give you a time estimate when booking and text updates if the scope changes.
Sanger Fireplace Services and Denton area pricing: gas fireplace service runs $150-$275; wood burning cleaning and inspection runs $225-$375; repairs range from $350 for panel replacement to $2,800+ for masonry work; conversions and insert installations run $2,800-$7,500. The exact price depends on your fireplace type, condition, and any parts needed. Call (940) 373-6912 for a free, written estimate with no obligation.
We service all major brands including Heat & Glo, Majestic, Napoleon, Monessen, Superior, and Lennox, plus we source venting components from Gelco, Olympia Chimney, Famco, and Copperfield through our Haven buying network. If your unit is discontinued or the label is worn, we identify it by construction features and source compatible parts. Bring us any make - we can service it or tell you honestly if replacement is the better option.
Annual service is preventive; specific symptoms like gas odors, smoke in the room, or cracked firebox components are urgent and the fireplace should not be used until inspected. For routine maintenance, scheduling before the burning season starts is wise - our October-December calendar fills first. We’ll tell you plainly if a condition can wait or if it needs immediate attention, with camera evidence you can see for yourself.
All workmanship is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. Parts carry manufacturer warranties ranging from 1 year to lifetime depending on the component. The warranty terms are written on every invoice, not implied or verbal. Haven Standard Clause 1 requires this documentation so you have recourse without argument.
Clear a 6-foot workspace around the fireplace and remove any valuables or fragile items from the mantel. For gas units, ensure the gas valve is accessible and the pilot has been off for at least 30 minutes if you’ve attempted to light it. Have your model number ready if visible. We handle protective covering, tool setup, and cleanup - you don’t need to do anything else. Call (940) 373-6912 to book and we’ll confirm these details by text.
Schedule Your Fireplace Services Service in Denton Today
Call (940) 373-6912 to speak with a live person 24 hours a day, or request a free estimate for any fireplace service in Denton. We’ll deliver a written price before any work starts, document every finding with camera photos under Haven Standard Clause 4, and back the result with our 365-Day Done Right Promise. No obligation, no pressure, no surprises.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Denton since 2009.