Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Lewisville, TX
Chimney cap and crown work in Lewisville typically runs $285-$1,850 depending on whether we’re sealing hairline cracks or replacing a rusted chase cover on a 1990s prefab unit. Most Lewisville homeowners with factory-built fireplaces need crown coating or cap replacement, not full masonry rebuilds, because the underlying chase structure is wood-framed with galvanized steel. We’re Emberly Chimney Cleaners, and we dispatch to Lewisville from our Dallas-Fort Worth office with camera-equipped crews who document every flue before quoting. Call (940) 373-6912 for a written estimate.
Why Lewisville Homes Are Different
Lewisville’s residential core is built almost entirely on 1980s-1990s DFW suburban tract development, meaning the vast majority of fireplaces are factory-built zero-clearance prefab units - not masonry - now 30-40 years old and well past their typical 20-25-year service life. February 2021’s Winter Storm Uri caused thousands of Lewisville homeowners to run fireplaces that had sat untouched for years, surfacing cracked refractory panels, seized dampers, and collapsed chase covers in these aging prefab systems at scale.
On pre-2000 Lewisville homes with prefab chase chimneys, the original galvanized steel chase covers rust through almost universally around the 25-30-year mark. Local sweeps routinely pull back deteriorated covers to find rotted OSB sheathing and orange rust staining down the chase exterior - silent water damage that has often been ongoing for years before the homeowner noticed anything. North Texas mild winters mean these fireplaces sit idle 8-10 months a year, making uncapped flues prime habitat for chimney swifts and wasp colonization.
Our Main Lewisville Services
These are the three services Lewisville homeowners call us about most often.
Chimney Sweep in Lewisville
Our Lewisville sweeps focus on prefab systems: camera-scanning the metal flue, checking refractory panels for cracks, and verifying damper operation. We document everything under Haven Standard Clause 4 and deliver a written price before any work starts. Chimney Sweep in Lewisville
Chimney Repair in Lewisville
Chimney repair in Lewisville means chase cover replacement, refractory panel swaps, and water-damage remediation on wood-framed chases - not traditional tuckpointing. We source chase covers through Copperfield and Olympia Chimney’s buying network. Chimney Repair in Lewisville
Fireplace Services in Lewisville
We service gas log sets, repair or replace factory-built fireboxes, and handle damper repairs on the prefab units found in Valley Vista and Castle Hills-area homes. Every visit includes NFPA 211 Level 2 camera inspection. Fireplace Services in Lewisville
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cap & Crown in Lewisville
Chimney cap and crown work in Lewisville is almost always chase cover and crown coating on prefab units, not traditional masonry crowns. The original galvanized steel chase covers in 1980s-1990s tract homes like Highlands and Valley Vista have hit their rust-through window, and February 2021’s heavy use exposed how many were already failing silently. Chimney Cap & Crown jobs here require understanding wood-framed chase construction and the water paths that rotted OSB creates.
Chase Cover Replacement
Signs you need it
Orange rust streaks down your chase siding, water stains on the ceiling near the fireplace, or a cover that sounds hollow when tapped.
What it costs in Lewisville
Chase cover replacement in Lewisville typically runs $450-$850 for standard prefab sizes, with custom fabricated stainless running $750-$1,250.
How we do it
We remove the old cover, inspect and photograph the OSB crown beneath with our camera, replace rotted sheathing if needed, then install a new stainless or copper cover with proper drip edges and storm collar.
Crown Coating
Signs you need it
Hairline cracks visible on the crown surface, minor water intrusion in the firebox after rain, or flaking concrete on masonry crowns in older Lewisville homes.
What it costs in Lewisville
Crown coating in Lewisville ranges from $285-$550 depending on crown size and whether we need to bridge gaps wider than 1/8 inch.
How we do it
We clean the crown, apply a flexible elastomeric coating rated for thermal cycling, and document the finished membrane with photos under Haven Standard Clause 4.
What Chimney Cap & Crown Costs in Lewisville
| Item | Typical range in Lewisville |
|---|---|
| Crown coating | $285 - $550 |
| Chase cover replacement (standard) | $450 - $850 |
| Chase cover replacement (custom stainless) | $750 - $1,250 |
| Full crown rebuild (masonry) | $1,200 - $1,850 |
How long does a chase cover last in Lewisville?
A stainless steel chase cover properly installed with storm collar and drip edge lasts 20-25 years in North Texas conditions; the original galvanized covers we’re replacing typically failed in 15-20. We warranty our installs under the 365-Day Done Right Promise.
Can you match my siding after chase cover replacement?
We coordinate with Lewisville siding contractors for chase re-wrapping when needed, and we photograph all sheathing conditions before cover installation so you see exactly what was beneath.
Chimney Liner & Rebuild in Lewisville
Chimney liner and rebuild work in Lewisville centers on prefab flue liner replacement and partial chase rebuilds, not traditional masonry teardowns. The metal flue pipes in 1980s-1990s factory-built units have corroded through in many Lewisville homes, especially after Winter Storm Uri forced heavy use on systems that hadn’t been inspected in years. Chimney Liner & Rebuild jobs here require matching OEM flue diameters and understanding the clearance requirements of zero-clearance construction.
Stainless Steel Liner
Signs you need it
Visible rust flakes in the firebox, a liner that fails our camera inspection with holes or separation at joints, or smoke spillage into the room during operation.
What it costs in Lewisville
Stainless steel liner installation in Lewisville runs $1,800-$3,200 for prefab flue replacement with proper insulation pack and termination.
How we do it
We measure the existing flue, source DuraFlex or Olympia Chimney liner in the exact diameter, insulate per manufacturer clearance requirements, and document the full run with camera footage.
Partial Rebuild
Signs you need it
Collapsed chase framing, extensive OSB rot extending below the roofline, or a shifted chimney stack visible from the ground.
What it costs in Lewisville
Partial chase rebuild in Lewisville typically ranges $2,500-$4,500 depending on framing extent and whether the roof intersection needs re-flashing.
How we do it
We strip damaged sheathing, replace framing with pressure-treated lumber, re-wrap with moisture barrier and siding match, and install new chase cover and termination.
What Chimney Liner & Rebuild Costs in Lewisville
| Item | Typical range in Lewisville |
|---|---|
| Stainless steel liner (prefab flue replacement) | $1,800 - $3,200 |
| Flexible liner (offset flue applications) | $2,200 - $3,800 |
| Partial chase rebuild | $2,500 - $4,500 |
| Full chimney rebuild (masonry, rare in Lewisville) | $4,500 - $8,500 |
Do I need a full rebuild or just a new liner?
Most Lewisville prefab units only need liner replacement if the chase structure is sound; we determine this with camera inspection and physical probe of the OSB crown, then quote both options in writing before you decide.
How long does liner replacement take?
Most prefab liner replacements in Lewisville are completed in one day; partial rebuilds typically take two days with weather hold for sealants.
Brands We Service in Lewisville
We stock and install materials from Olympia Chimney, Famco, and Copperfield through our Haven buying network, with DuraFlex liners available for next-day Lewisville jobs. Our trucks carry common prefab chase cover sizes and liner diameters to avoid delay.
Pricing for Chimney Cleaning in Lewisville, TX
| Service | Typical range in Lewisville |
|---|---|
| NFPA 211 Level 2 inspection with camera | $175 - $250 |
| Chimney sweep (prefab unit) | $225 - $325 |
| Chimney sweep (masonry, rare) | $275 - $375 |
| Crown coating | $285 - $550 |
| Chase cover replacement (standard) | $450 - $850 |
| Chase cover replacement (custom stainless) | $750 - $1,250 |
| Full crown rebuild (masonry) | $1,200 - $1,850 |
| Stainless steel liner (prefab flue) | $1,800 - $3,200 |
| Flexible liner (offset flue) | $2,200 - $3,800 |
| Partial chase rebuild | $2,500 - $4,500 |
| Full chimney rebuild (masonry) | $4,500 - $8,500 |
Prices increase in Lewisville when we encounter rotted OSB sheathing requiring replacement, or when chase covers need custom fabrication for non-standard prefab dimensions. We deliver a written price before any work starts, every time, with no exceptions - Haven Standard Clause 1.
Neighborhoods We Serve in Lewisville
We work throughout Lewisville’s 1980s-1990s core and newer infill, with crews typically arriving within scheduled windows coordinated from our Dallas-Fort Worth office.
- Highlands
- Valley Vista
- Castle Hills
- Old Town Lewisville
- Foxborough
Service Area - Cities Near Lewisville
Our crews serve Lewisville homeowners and the surrounding lake country regularly, including Lake Dallas, TX to the north, Coppell, TX to the south, The Colony, TX to the east, and Flower Mound, TX to the west. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office.
Serving Lewisville, TX - Our Local Coverage Area
We’re based in the Lewisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Lewisville
Most chimney cap, crown, and liner replacements on existing prefab units don’t require permits in Lewisville; full rebuilds or structural modifications may. We handle permit research as part of our written scope when needed, and we note any HOA notification requirements for Castle Hills or similar communities.
We typically book Lewisville inspections within 3-5 business days, with flexibility for weather holds during spring storm season. Our live dispatch team answers calls 24/7 to find slots that work.
Yes - we provide written scope, photo documentation, and material specifications that Lewisville HOAs commonly require for exterior chimney modifications, and we can coordinate directly with your property manager.
Call (940) 373-6912 for a free written estimate on chimney cleaning, cap and crown work, or liner replacement in Lewisville. Every quote includes camera inspection, documented photos, and our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lewisville Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.